Synchronous repair method: during production, if a fault is found, try not to repair it and adopt maintenance method. Make the production line continue to produce until holidays, and concentrate the maintenance workers and operators to repair all problems at the same time. The equipment will be in normal production on Monday.
Partial repair method: if the automatic production line has major problems, the repair time is more frequent. Synchronous repair method cannot be used. At this time, use the holidays to concentrate the maintenance workers and operators to repair a certain part. The other parts will be repaired until next holiday. Ensure that the automatic production line/assembly line does not stop production during working hours.
In addition, the method of pre repair shall be adopted as far as possible in the management. Install a timer in the equipment, record the working time of the equipment, apply the wear law to predict the wear of vulnerable parts, and replace vulnerable parts in advance, so as to eliminate the fault in advance. Ensure the full capacity of the production line and assembly line.
Maintenance of automatic assembly line and production line: check and clean the circuit, gas circuit, oil circuit and mechanical transmission parts (such as guide rail) before and after work; Patrol inspection shall be carried out in the working process, spot check shall be carried out in key parts, and any abnormality found shall be recorded. Small problems shall be handled before and after work (the time is not long), and accessories shall be prepared for major problems; Unify the shutdown and maintenance of the whole assembly line and production line, make a good plan for vulnerable parts, and replace vulnerable parts in advance to prevent unburned. The automatic assembly line and production line mainly focuses on full-automatic production, which can greatly save labor costs and improve production efficiency.
Hongdali always open to our customers for their needs and concerns, so that we can better assist you for the conveyors systems and assembly lines.
Hongdali provide different kinds of conveyors, like roller conveyors, curve conveyors, belt conveyors, inclined conveyors… At the meantime, hongdali also provide assembly line for home appliance. We are looking agents allover the world to be our agent for wholesale conveyors, wholesale conveying system, wholesale working conveyors, wholesale belt conveyors systems,assembly lines agent, we supply conveyors and assembly lines accessories, like motors, aluminum frames, metal frame, running conveyor belt, speed controller, inverter, chains, sprockets, rollers, bearing… also we supply engineers technical supports, and provide the installation, maintain, training for you. Hongdali is always looking forward friends from all over the world to work with us.
Hongdali main products are assembly line, the automatic assembly line, the semi-automatic assembly line, roller conveyor type assembly line, belt conveyor type assembly line. Of course, Hongdali also provide different kinds of conveyor, green pvc belt conveyor, powered roller conveyor, non-power roller conveyor, gravity roller conveyor, steel wire mesh conveyor, Teflon conveyor with high temperature, food grade conveyor.
Hongdali have experienced engineer team and mechanical engineer team to support oversea projects. Our engineer team will help you to plan your factory based on your layout and guide you how to place the assembly line and conveyor. For installation, we will send engineer team to guide you how to install and train you how to use and maintain for the conveyor and assembly line.
Post time: Jun-15-2022